IDR300-PSL Photobiological Safety Spectroradiometer

Electro-Optical

Monochromator

IDR300 double monochromator including integrated picoammeter and high voltage supply

Monochromator configuration

Symmetric, Czerny-Turner

Monochromator focal length

600mm (200-1100nm, double mode)

300mm (1100-3000nm, single mode)

Stray light rejection at 2.5 FWHM (single)

10-4

Stray light rejection at 2.5 FWHM (double)

10-8

Bandwidth

Software controlled motorised slit

Number of gratings

3 (Turret 1)

2 (Turret 2)

Resolution

0.075nm (2400g/mm)

0.3nm (1200g/mm)

0.9nm (400g/mm, single mode)

Dispersion

0.675nm (2400g/mm)

1.35nm/mm (1200g/mm)

8.1nm/mm (400g/mm)

Wavelength accuracy

± 0.05nm (2400g/mm)

± 0.1nm (1200g/mm)

± 0.6nm (400g/mm)

Detectors (200-1400nm)

Multi-alkali photomultiplier

Silicon and InGaAs photodiodes

Detectors (1000-3000nm)

PbS photodiode

Signal recovery (200-1400nm)

2 dual-channel picoammeters

Signal recovery (1000-3000nm)

Pre-amplifier followed by lock-in amplifier

Irradiance entrance optic (200-1100nm)

Cosine corrected transmission diffuser, 1m quartz fibre bundle

Irradiance entrance optic (1000-3000nm)

Integrating sphere followed by CaF2 relay optic

Radiance entrance optic

Direct view telescope permitting measurement from 200mm to 10m in key 1.7, 5 and 11mrad FOVs. Coupled to IDR300 with 1m long quartz fibre bundle

Spectral irradiance standards

Quartz halogen and deuterium irradiance standards, supplied with calibration traceable to PTB, Germany

Spectral radiance standard

Quartz halogen, integrating sphere-based radiance standard, supplied with calibration traceable to PTB, Germany

Beam profiler

CMOS based beam profiler to determine (apparent) source size and location

Illuminance meter

Photometric detector with virtual luxmeter

System Requirements

Bench space

1 x 0.5 m not including working space for computer and source under test

Computer

OS: Windows 7 or newer (32-/64-bit)

Minimum hard disk space: approx. 100MB

Minimum RAM: 2GB

3 x USB 2.0 ports

Power

3 x 110/220V AC mains sockets, 400VA total

Mechanical & Interface

Dimensions

 

Software control

Benwin+ spectral acquisition software

PSL Wizard measurement guidance, calculation and reporting application

Interface

USB 2.0

Share this:

The Bentham Standard

We’re with you from the first call to the final result

Call us on +44 118 975 1355 or email us