NVC150 Night Vision Compatibility Testing

  • NVC150 System Image
  • NVC150 System Set-up
  • NVC150 Telescope view
  • NVC150 System Set-up

Featuring two configurations, as a spectroradiometer, the NVC150 permits accurate assessment of interior lighting (MIL STD 3009) and exterior lighting (SAE ARP5825, STANAG 1445 etc) whilst as a spectrophotometer, is utilised in the detailed evaluation of NVIS filter transmission.

Across all applications, the superlative performance of the NVC150, including excellent stray light rejection and unparalleled sensitivity, delivers accurate NVIS compatibility characterisation and ultimate measurement confidence across the life time of the system.

Core benefits

Features

  • Double monochromator for superlative stray light performance
  • Windows control software (BenWin+) provides full automation via USB 2.0
  • Thermoelectrically cooled photomultiplier detector (S20 photocathode)
  • Optional spectroradiometer and spectrophotometer modes
  • Range of telescope input optics
  • Reports colourimetric parameters, luminance, NRa and NRb

Applications

  • MIL STD 3009 - Lighting, aircraft, night vision imaging system (NVIS) compatible
  • SAE ARP5825 -Design Requirements and Test Procedures for Dual Mode Exterior Lights
  • STANAG 1445 - Conduct Of Maritime Nvg Cross Operations

Reported Parameters

  • Colourimetric parameters
  • Luminance
  • NRa
  • NRb

Measurement

Spectral range of operation380-930nm
Spectral data interval5nm
Spectral bandwidth (FWHM)5nm
Wavelength accuracy± 0.3nm, ± 0.05nm with software correction
Wavelength reproducibility± 0.05nm
Resolution0.5nm
Stray light rejection at 2.5 FWHM10-8
Minimum working distance25mm with Macro lens
Maximum working distance50m with TL1 lens
Typical NER10-10 W.m-2.sr-1
Bench space required1m deep x 2.5m wide typical including working space
Services requirements2 x 110/220V AC mains sockets, 400VA total

Computer Requirements

OS Windows 7, Windows 8 (32-/64-bit) operating systems (or newer)
Minimum hard disk space Approx. 100MB
Minimum RAM2 GB
Interface1 x USB 2.0 port

Options

Extension to 1100nm (or greater) for measurement of IR LEDsInclusion of second exit port and DH_Si silicon photodiode
Transmission measurement of filtersInclusion of IL1 general illuminator and filter holder, to be mounted on monochromator entrance slit
Electro-luminescent panel Radiance
Spectrum of traditional electro-luminescent panel (NVIS green)
Spectrum of filtered white LED
Spectrum of filtered white LED

Ordering Information

NVC150Evaluation and development of NVIS enabled products

Software Control

The NVC150 is fully automated through the USB interface, and controlled by the Benwin+ Windows software, allowing easy system calibration, source measurement, and the automatic reporting of NVIS parameters including colourimetric parameters, NVIS colour region, NRa and NRb.

The Bentham Standard

We’re with you from the first call to the final result

Call us on +44 118 975 1355 or email us