DH_3 Multi-Alkali Photomultiplier (200-850nm)

  • DH-3  photocathode 200-850nm
  • DH-3 photocathode connectors
  • DH-3 photocathode scintillator

Housing a end-window multi-alkali (S20 photocathode) photomultiplier tube, a mu-metal shield and a PCB based dynode chain, reliable operation and exceptional linearity can be ensured. The 215 high voltage supply module maintains the photocathode at a negative high voltage. TThe photocurrent generated by this detector is best measured using the 487 picoammeter or the 477 pre-amplifier followed by the 496 lock-in amplifier.

The mounting flange supplied with the DH_3 is compatible with the entire range of Bentham monochromators and accessories.

Core benefits


  • Housed photomultiplier tube featuring mu-metal shield and PCB dynode chain
  • Operated in either the DC or AC regimes
  • Compatible with Bentham's entire range of monochromators and accessories
  • Recommended for use with 400 series detection electronics


Photocathode S20
Active area 20mm diameter
Window material Fused silica
Number dynodes 10
Dynode chain resistance Linear: 750 kΩ
Pulse Counting: 3.92 MΩ
Operating mode Photoemmisive
Spectral response range 200-850nm
Peak wavelength (typ.) 420 nm
Dark current (typ.) 500pA at 750V
NEP 1 x 10-16 W.Hz-1/2
Max. high voltage 1500V DC
Max. anode current 100μA
Max. operating Temperature -80 to +50°C


Connector BNC/HV-BNC
Compatibility Supplied with an interface plate, 4 x M3 clearance holes (Bentham slit pattern)

Ordering Information

DH_3_S20 End-window multi-alkali photomultiplier detector

Share this:

The Bentham Standard

We’re with you from the first call to the final result

Call us on +44 118 975 1355 or email us

You are currently offline. Some pages or content may fail to load.