For Bentham Instrument's latest COVID-19 update please click here.

498 Hybrid AC Current Pre-amplifier-DC Nanoammeter Module

  • 498 modular hybrid AC current pre-amplifier-DC nanoammeter unit

In the AC mode, the 498 is deployed as a pre-amplifier for lock-in amplifiers employing current source detectors, i.e. photomultipliers and photodiodes.

In DC mode, the 498 nanoammeter represents the main detection electronic. Offering short-circuit detector operation and an impressive six decades of gain, wide dynamic range measurements with excellent linearity can be realised.

The 498 can be operated from the front panel or fully automated over the USB interface. Over-load and under-load flags are included to enhance optimal remote operation.

Core benefits

Features

  • Dual width module housed within the 417/417T unit
  • Dual input lock-in pre-amplifier
  • Dual input nanoammeter
  • Virtual ground input
  • Front panel control
  • Fully programmable via USB 2.0 interface

Electrical

Channel 1 input Current input to trans-impedance amplifier
Channel 2 input Current input to trans-impedance amplifier
Gain Ranges 108-103 V/A
Maximum Current Input 10mA
Gain Accuracy +1%
Gain Stability 200ppm/°C
Output Stability 5ppm/°C to 500ppm/°C depending on sensitivity
Linearity < 0.025% departure from linearity from zero to full scale
ADC Resolution 4½ digit BCD (0 to 19999) i.e. > 14 bit resolution
ADC Integration Time 100ms
Input Impedance Virtual earth
Frequency Response 103 V/A Range (-3dB) > 1MHz
Frequency Response 104 V/A Range (-3dB) 1MHz
Frequency Response 105 V/A Range (-3dB) 260kHz
Frequency Response 106 V/A Range (-3dB) 30kHz
Frequency Response 107 V/A Range (-3dB) 23kHz
Frequency Response 108 V/A Range (-3dB) 4kHz

Interface & Mechanical

Interface USB via 417/417T Unit (I2C)
Control Front panel/ USB
Front Panel Controlled Features Input select, gain range select
Dimensions Dual width module, 3U high
Connector BNC
Display Digital display of 417 unit, channel A

Ordering Information

S400_498 498 Hybrid AC Current Pre-amplifier-DC Nanoammeter Module

Share this:

The Bentham Standard

We’re with you from the first call to the final result

Call us on +44 118 975 1355 or email us

You are currently offline. Some pages or content may fail to load.