Cu2ZnSnS4 thin films have been produced via rapid thermal evaporation of off-stoichiometric kesterite powder followed by annealing in an Ar atmosphere. Different heating rates were applied during the thermal treatments. The chemical composition and structural properties of the deposited layers as well as the distribution of the elements through the kesterite thin film have been investigated.
The initial growth of a SnS secondary phase during evaporation led to the formation of this secondary phase next to the Mo back contact. Solar cell power conversion efficiencies were limited to values about 3% due to this secondary phase. Furthermore, an increased open circuit voltage was demonstrated by using a Zn(O,S) buffer layer.
Garcia-Llamas, E., Merino, J.M., Gunder, R., Neldner, K., Greiner, D., Steigert, A., Giraldo, S., Izquierdo-Roca, V., Saucedo, E., León, M. and Schorr, S., 2017. Cu 2 ZnSnS 4 thin film solar cells grown by fast thermal evaporation and thermal treatment. Solar Energy, 141, pp.236-241.
Redirect to full article: Click Here
Categories: Solar & Photovoltaics