|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|
|
 |
|
||
 |
 |
 |
|
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
|
|
 |
|
||
 |
 |
 |
|
 |
|
||
The 605 is a constant current power supply specifically designed for used with stabilised light sources and calibration standard sources (eg. quartz halogen, xenon, Nernst element, etc.)
Max. output current |
12A d.c.
|
|---|---|
Max. output power |
250W
|
Max. compliance voltage |
35V d.c.
|
A key switch provides 4 current settings:
- 1.666A calibrated output
- 4.000A calibrated output
- 8.5A calibrated output
- variable output 2 to 12A
Specification |
|
|---|---|
Temperature |
30ppm/°C |
Indications |
Green LED: power ON Red LED: Lamp failure (this will illuminate if the power supply is unable to output the current set, i.e. compliance voltage is low) |
Front panel meter |
Output voltage indicator (accuracy ±0.1V, not suitable for precision voltage readings) |
Fan output |
110V a.c. (typically 200mA) |
Mains input voltage |
Back panel switch to select nominal 110V or 220/240V a.c. |
Mains frequency |
50Hz or 60Hz |
Mains input fuse |
Anti-surge (220/240V) |
Dimensions - WxDxH |
450 x 310 x 130mm |
Weight |
9kg |